3.5” kits come with raised
rear trackbar track to center axle and correct roll center for improved
handling. What are the JL Enforcer OVERLAND Systems, EVO-3012 Kits?
The difference with EVO MFG Enforcer Overland systems (EVO-3012s) vs EVO
MFG Enforcer systems (EVO-3011s) is the use of front Overland Control
Arm Brackets. When lifting your vehicle your control arms at ride
height have a steeper angle towards the floor which can have some
negative effect/chop in ride quality. With the use of the included
Overland Control Arm brackets we relocate the front control arm mounting
locations at the frame. In doing this when lifted we maintain factory
flatter control arm angles and while minimal, we alleviate much of the
chop associated with lifting a Jeep giving even better and more improved
ride quality.

Also, in the use of Overland Drop Brackets we are able to
engineer more performance into the front suspension to improve braking
and driveline angles through suspension cycle. Both kits drive very
well, the Overland Kits are better suited for less hard off-road
crawling and more light off road and on road use. The EVO MFG 3.5″ JL
Enforcer Kits are easy to install using normal tools. No drilling or
cutting (optional rear shock extensions require one minor drill). They
require no driveshaft or exhaust modifications (your shock choice may
require this, contact manufacturer to be sure). Simple Bolt on
installation. 3.5” lift is based on increase of a 4 Door Rubicon. 4
Door Sport and Sahara Models will see slightly higher increases over
stock and will match overall lift height of a Rubicon Model. 2 Door
Models (all) will see slightly higher increases in lift. Increases will
vary. Stage 1 kits includes all the necessary parts to lift your JL
3.5”s. Stage 2 kits includes Stage 1 components as well as EVO MFG
Enforcer JL Front Lower Adjustable Control Arms to allow for caster
adjustments. Stage 3 Kits includes stage 2 components as well as EVO MFG
Enforcer rear upper adjustable control arms for rear pinion angle
adjustment Stage 4 kits includes stages 1 components with all 8 EVO MFG
Enforcer control arms for full front and rear axle adjustments. *All
part number “EXT” kits include front and rear shock extensions. “K” Kits
include EVO SPEC King Shocks. Retaining factory shocks while maintaining
full wheel travel. Note: Depending on actual tire variances and sizes,
Some trimming of body sheet metal, fenders, bumpers and inner fender
liner may be required with stated tire sizes to fully clear under


The EVO MFG 3.5” JL Enforcer Lift Suspension Systems lift your 2018+
Jeep Wrangler JL 3.5”s.
Our main goal in developing this kit was to give a performance ride on and off road while giving added vehicle lift. The JL Enforcer kits are specifically designed to lift your JL
and maintain a performance spring rate, smooth ride quality while having
the option of retaining factory shocks, maintaining wheel travel with
use of shock extensions (part number EXT kits) or without shock
extensions to allow for use of your choice of aftermarket 3-5” lift
shocks or use of our EVO SPEC 2.5” Remote Reservoir King Shocks. These
kits come with a set of 3.5” lift springs specific to each corner which
will keep the Jeep Wrangler JL level side to side. EVO MFG JL Enforcer
kits are available in multiple configurations to suit your needs and
budget and are upgradable down the road.

All 3.5″ JL Enforcer its require wheel spacers or aftermarket wheels with smaller backspacing.

Front aftermarket driveshaft is not required when equipped with EVO Spec King Shocks

Adjustable Front Trackbar is required to complete proper installation, Front and rear adjustable trackbars are included with PLUS “P” kits




Additional information

Weight 22 lbs


There are no reviews yet.

Be the first to review “EVO MFG – JL 3.5″ ENFORCER OVERLAND LIFT STAGE 1”

Your email address will not be published. Required fields are marked *